Switches VP 73
Travel switches of semi-momentary action VP 73 with double bridge
ТУ У 31.2-03967731-012:2012
Purpose
Switches are designed for switching of electrical control circuits of alternating current with frequency of 50 and 60 Hz with voltage up to 380V and direct current with voltage up to 220V under the driven by switching strips at certain points of the monitored object tracks. Switches are manufactured for installation on mobile and fixed parts of stationary machines in elevators and other equipment. .
Travel switches ВП73 (are similar to МП 1000, ВБПЛ -4) have a double, galvanically separated bridge contact that meets the increased safety requirements in accordance with the Elevator Safety Rules ПБ 10-558-03. .
- Characteristic
- Documents
- Marking
General characteristic
Rated thermal current, А | 10 | Rated insulation voltage,В | 660 |
Elevation above a sea level no more | 2000 m | Operating ambient temperature t, C | up - 45 to + 55 |
Number of poles | 2 | Contact group | 1з.+1р. |
Protection level | ІР00 | ||
Commutation cycle wear resistance no less | 1,6 mil. | Working position of switch in space | any |
Minimum switched current | 0,05А (at 12В) | Used contacts with a silver mass (g) | 0,384 |
Drive type | pusher, pusher spherical, pusher spherical truncated, pusher with longitudinal and transverse roller arrangement, lever shortened with a roller, lever with a roller, lever elongated with a roller, lever, lever elongated, pusher spherical elongated, pusher elongated with longitudinal and transverse arrangement of the roller, pusher with a ball, pusher shortened |
Service conditions:
- Value range of operating ambient temperature during operation: for УХЛ3 from minus 45 to plus 45 ° C, for T3 - from minus 10 ° C to plus 55 ° C;
- Relative air humidity - 98 % at temperature of 25°С;
- Elevation above a sea level, no more 2000m;
- The environment is non-explosive, does not contain current-carrying dust and corrosive gases in concentrations that reduce parameters of products in inadmissible limits
Structure of conditional denotation of switches of series VP 73: